Track object under the SRG which holds that particular interface: RP/0/ RSP0 /CPU0:router# configure RP/0/ RSP0 /CPU0:router(config)# track mclag-be1 RP/0/ RSP0 /CPU0:router(config-track)# type line-protocol state RP/0/ RSP0 /CPU0:router(config-track-line-prot)# interface Bundle-Ether1
PEAKHOUR MAC ENABLER HOW TO
How to configure object tracking for detecting access connectivity for the System Management Configuration Guide for Cisco ASR 9000 Series Routers. The subordinate does not advertise the routeįor details on configuring track object, see This ensures that the subscriber summary route (or routes) is activated only when the underlyingĪccess is up or active and only then it is re-distributed into core routing. This ensures that SRG/SERG primary or subordinate role follows the underlying access role.Īdvertisement of the summary route for the subscriber address/subnet pool can be also controlled through the same access-tracking You must configure the track object first and then configure that track object under the SRG/SERG which holds that particular Object tracking feature allows correlation of the role of BNG SRG/SERG with the role or status of the underlying access-interface,Īnd it is the key for automatic switchovers and for handling failure scenarios. Subscriber redundancy group configuration. To remove the object tracking configuration, use the no form of this command.Īccess-tracking access-tracking-obj Syntax Description access-tracking-obj Redundancy Group (SERG), use the access-tracking command in the respective group configuration mode. To configure object tracking for detecting access connectivity for the specific Subscriber Redundancy Group (SRG) or Session If the user group assignment is preventing you from using any command, contact your AAA administrator for assistance. To use commands of this module, you must be in a user group associated with a task group that includes appropriate task IDs. For details regarding the related configurations, refer to the Cisco ASR 9000 SeriesĪggregation Services Router Broadband Network Gateway Configuration
PEAKHOUR MAC ENABLER SOFTWARE
This module describes the Cisco IOS XR software commands used to configure the subscriber and session redundancy commands for Broadband Network Gateway (BNG) on the CiscoĪSR 9000 Series Router. Subscriber and Session Redundancy Commands subscriber featurette dhcp-renew-author.http-enrichment parameter-list (subscriber).Subscriber and Session Redundancy Commands.
0 kommentar(er)
